دستگاه فلومتر التراسونیک
. Transit Time flow measurement
The transit time technique uses a pair of transducers each of them
sending and receiving a ultrasonic signal through the fluid.
When the fluid is flowing, signal transit time in downstream direction
is shorter than in upstream direction; the difference between these
transit times is proportional to the fluid velocity. EUROSONIC 2000
HH measures accurately this value and correlates it to the flow rate
through the inner pipe diameter.
2. Transducers
EUROSONIC 2000 HH uses non wetted clamp on transducers for
ease of installation and removal.
Clamp on transducers are magnetically or mechanically installed on
the outer surface of the pipe where the flow has to be measured.
EUROSONIC 2000 HH | HAND HELD TRANSIT TIME ULTRASONIC FLOW METER
2 / 4 Handset, Transducers and Suitcase
3. Applications
The EUROSONIC 2000 HH is a complete hand held metering system
for measurement of the following liquids.
• Potable water,
• Sewage (with limited particle content);
• Seawater;
• Wastewater;
• Discharge water;
Other liquids used in the following industrial applications:
• Power plants;
• Heat energy metering;
• Metallurgy and mines;
• Petroleum and chemicals;
• Food and Pharmaceutical
• Marine Operations;
• Pulp and paper;
4. Features
• Economic, non intrusive, flow measurement.
• Easy set up and installation;
• Wide range of pipe sizes and materials;
• Suitable for lined pipes;
• Velocity, volumetric and totalized flow;
• Key pad for ease of operation;
• Lightweight and long operating time.
3 / 4
Fluid Types
Acoustically conductive fluids,
clean and free from gas bubbles.
Pipes
PIPE SIZES
EST-S1 Transducers:
EST-M1 Transducers:
EST-L1 Transducers:
PIPE WALL THICKNESS
PIPE MATERIALS
LINERS
1. Sea Water
2. Kerosene
3. Gasoline
4. Fuel Oil
5. Crude Oil
6. Propane (-45C)
7. Butane (0C)
8. Other
9. Diesel Oil
10. Castor Oil
11. Peanut Oil
12. Gasoline #90
13. Gasoline #93
14. Alcohol
15. Water (125C)
15mm to 100mm (1/2" to 4")
50mm to 700mm (2" to 28")
300mm to 6000mm (12" to 240")
Up to 76mm (3")
0. Carbon Steel
1. Stainless Steel
2. Cast Iron
3. Ductile Iron
4. Copper
5. PVC
6. Aluminum
7. Asbestos
8. FiberGlass-Epoxy
9. Other
1. Tar Epoxy
2. Rubber
3. Mortar
4. Polypropylene
5. Polystryol
6. Polystyrene
7. Polyester
8. Polyethylene
9. Ebonite
10. Teflon
table 3
table 2
Specifications
Measurement
Accuracy
Linearity
Repeatability
Response time
Velocity (Bidirectional)
Rangeability
Measurement Parameters
±1 to 3%
0.5%
0.2%
1 to 999 s (User configurable)
0~30 m/s (0~98 ft/s)
500:1
Instantaneous flow rate
Totalized flow (4 totalizers)
Velocity
table 1

تلفن :	منقضی شده
منطقه :	استان تهران
آدرس :	استان تهران - تهران

تماس با آگهی دهنده ()
در مورد: دستگاه فلومترالتراسونیک

نام :
ایمیل یا تلفن :
پیام :	با سلام

کلمات کلیدی :

ورود کاربران

آپلود ویدیو

پرداخت با کارتهای عضو شتاب

آگهی های جدید

کلمات کلیدی

دستگاه فلومترالتراسونیک

آگهی های مرتبط